Home > Products > Low Cost Wall Panel > Lower cost and energy saving w.....
Browse Categories
Green panel(182)
Lightweight Wall Panel(208)
Partition Wall Panel(152)
Fast Installation Wall Panel(136)
Low Cost Wall Panel(129)
Interior Wall Panel(84)
Exterior Wall Panel(86)
Mgo Board(157)
Partition Board(24)
New technology(0)
Raw materials(0)
Machine Line(0)
Low Cost Door Core(56)
Fire Rated Door Core(123)
Certifications
Contact us
Tel: +86-28- 8519 8642
Fax: +86-28-8593 8404
Email: sales@onekingroup.comContact Now
Lower cost and energy saving wall panel for interior exterior and partitionLower cost and energy saving wall panel for interior exterior and partitionLower cost and energy saving wall panel for interior exterior and partitionLower cost and energy saving wall panel for interior exterior and partition

Lower cost and energy saving wall panel for interior exterior and partition

  • Length:  
  •         2200 mm - 3600 mm
  • Thickness:
  •         90 mm/100 mm/ 120 mm/ 150 mm/200 mm
  • Width:
  •         600 mm
  • Standard Size:
  •         2800 mm*600 mm /2900 mm* 600 mm

PRODUCT INTRODUCTION

 

Onekin green wall panel is an environment-friendly panel which is widely used in wall construction, especially wall partition. It is a new type of non-flammable material made of lightweight materials.

 

It is made from magnesium oxide, magnesium chloride, fly ash, plant fiber and mixed together with non-toxic chemicals for strength.

 

Magnesium oxide is a natural fireproof material, so the highly purified magnesium is used as the main fireproof material, fly ash and plant fiber are applied as filling materials, and the high quality MgCI2 is used as the main cementing material to solidify other materials.

 

When compared with other similar materials, onekin green wall panel offers a number of benefits such as completely green material, no asbestos, higher fireproof , sound insulation, heat insulation, fast installation, easier decoration, and lower cost of project.

 

Lightweight

 

 

     

 

Onekin green panel is lighter than any other traditional panels, such as cement block, concrete block, cement panel ect.

 

The weight is only 45kg/m2 for 100mm while the weight for the cement board is about 120-140kg/m2. As a result , it can lower structural load, reducing oversized foundation, the lintel beams and stiffer etc.

 

 

Fast installation

 

  

 

 

The lightweight panel with tongue and groove design enables 3-5 times faster installation compared with that of cement panel or bricks.

 

The panel can be easily sawn, cut, drilled and taped. For one skilled worker can install 40m2 per day.

 

 

Save up to 30% of the cost

 

  

 

As onekin green panel is lightweight, it can reduce the cost of labor, foundation, structure, lintel beams and stiffer for the building, as well as transportation.

 

It enables fast installation, so it can significantly shorten the construction period and project management cost.

 

Moreover, the surface is smooth, so there is no need for plastering work after panel installation.

 

Therefore, the overall project cost will be reduced up to 30%. Also, as the panel is thinner, it can help to increase usable space.

 

 

80% Energy saving and heat insulation

 

 

Thermal conductivity for onekin green panel is 0.17w/mk.

According to Korean customer test, for the house built by green panel, electricity consumption is about Kwh per day.

While for a regular cement panel house, it is about kwh per day, which means we can save up to 80% energy.

 

Green panel VS Cement panel VS Bricks

 

 

Lighter weight:

36kg/m2: 1/3 of cement panel and bricks

Lower structure load

Reduce the base, lintel beams and stiffener

Faster Installation:

                40m2/day/worker: 2-5x faster installation

                Cement panel: 16m2/day/worker

                Bricks: 5m2/day/worker

                Shorten the construction time

Lower cost:

                Saving on : structure  labor   construction period    project cost

                Save up to 30% of the total cost

                Short pay back

 

Packing

Packing method 1:

 

picture(1)

 

Quantity of panels packed is based on the thickness of the panel(Generally for 100 mm thickness panels, we pack 11 panels together, while 150 mm are packed 7 or 8 pieces, in order to fully utilize the container space).

When loading, the forklift tongues are revised with a purpose of better loading panel with 5 steel tubes as shown in picture.

 

Packing method 2:

Wooden pallet package is also adopted. Generally, according to present method, a 40’ HQ container can load 16 pallets. For 8 pallets height is 10cm and the rest in 3mm height because of the fixed height of container.

 

 

 

Application:

 

1. General industrial buildings, such as high building and KTV

2. Residential buildings

3. Single house

4. Public construction, such as hotels, hospitals and schools

5. The fence of the factory

6. Kitchen, bathroom, and the indoor wall of toilet

7. Also can pasted on tiles and cement mortar

 

  

 

 

 

  

 

 

Contact us:

Tel: + 86 183 2881 7693 (Whatsapp/wechat/skype )

Email:sales609@onekingroup.com


Onekin Green Building Materials Co., Ltd.

Tel:0086-28-85198642

Contact Person:Arya

Send your inquiry directly to us
show code on cursor in the input box
( 0 / 3000 )