Home > Products > Mgo Board > Onekin lightweight and firepro.....
Browse Categories
Green panel(149)
Lightweight Wall Panel(158)
Partition Wall Panel(123)
Fast Installation Wall Panel(115)
Low Cost Wall Panel(119)
Interior Wall Panel(78)
Exterior Wall Panel(81)
Mgo Board(142)
Partition Board(23)
New technology(0)
Raw materials(0)
Machine Line(0)
Low Cost Door Core(55)
Fire Rated Door Core(108)
Certifications
Contact us
Tel: +86-28- 8519 8642
Fax: +86-28-8593 8404
Email: sales@onekingroup.comContact Now
Onekin lightweight and fireproof magnesium oxide   board with high strength 

Onekin lightweight and fireproof magnesium oxide  board with high strength 

  • Density:1.0-1.2kg/m3
  • Fireproof:grade A
  • flexual strength:≥8MPa
  • anti-impact;≥2kJ/m2
  • halogenation resistance:no water and no moisture created
  • water content:less than 8%
  • dry shrinkage rate:rate ≤0.3%
  • expansion in water rate:≤ 0.6%
  • content of chloride:≤ 10%
  • Certificate:ASTM,SGS,ISO9001,2000Qc systems


Onekin lightweight and fireproof magnesium oxide

 boardwith high strength




Test data about MgO fire rated door core:

 

   Bending strength: ≥8 Mpa 

   Compressive strength: 0.35-0.8 Mpa 

   Thermal conductivity: ≤0.035-0.076 w/(m*k)

    Water content: ≤10% 

    Fire rated: 0.6-2h



 

different density for different door:

 

    For lightweight wooden door PF: 220-280 Kg/m3 

    For ordinary steel wooden door KF: 280-340 kg/m3 

    For special steel door ZF: 380-500 kg/m




Glue material: fireproof glue, high temperature resistance 1100

 

Glue quantity: 300-350 g/m2, add solidify additives 3%-8% of the glue. Need to bonding in 5 minutes after brush the glue, then hot-press at 75-95centi degree, it will solidify after 30 minutes, it will take 4-6 hours to solidify, if use cold-press.

 





 

   Bonding must be proceed in 5 minutes after brush the glue, too long lead

 

time will result in little solidify on rubber surface; hot-press or cold-press must be proceed in one hour after bonding.If the temperature is low, need to length the cold press time to 12 hours.





 

but if the humidity reach 85% or the temperature below 10 centi degree,better use hot-press way.



Onekin Green Building Materials Co., Ltd.

Tel:0086-28-85198642

Contact Person:Arya

Send your inquiry directly to us
show code on cursor in the input box
( 0 / 3000 )